Gomaco 3300 extendedora de hormigón
Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor
+49 179 60...
+49 179 6069650
Alemania
Turkmenistán, Annau
EE. UU., Miami
Turkmenistán, Annau
Alemania, Ober-Mörlen
Alemania, Gräfelfing
EE. UU., Miami
China, Shanghai
Portugal
EE. UU., Miami
EE. UU., Miami
EE. UU., Miami
EE. UU., Miami
Georgia, Tbilisi
China, Shanghai
Reino Unido, Billingham
Year of manufacture: 2019
Serial number: 903100-362
Working hours: ~420 hours
Three-legged machine with a paving width of up to 3.5m full area
Paving in transport position and transverse
Incl. 3 pieces of farm tracks screeds up to 3.5m with vibrators
Engine: C3.4B diesel engine, Caterpillar- 120hp (93.3kW). Tier 4
Fuel tank, capacity: 265 liters
Hydraulic oil tank, capacity: 336.9 liters
Oil cooler
Eight hydraulic circuits
Automatic on/off switch for vibrators
- Synchronized with the machine movement
Hydraulic pump system
Fiberglass engine and control panel enclosure
- Improved visibility of the operator
- Better access to engine, pumps and valves
Operator station for left and right
- designed for easy monitoring of all hydraulic controls and electronic censoring functions as well as remote control of travel speed
G+ control panel and G+ Connect:
GOMACO's proprietary operating system - Handling is very user-friendly and easy to learn
- Self-diagnostic system with 165 mm (6.5 inch) anti-glare color and graphic display
- Pulse sensors in the crawler motors enable precise speed and distance measurement with various attachments.
- Detailed machine history
- 3D concreting systems are recognized immediately, which enables simple interface integration. Installation with 3D operating system is immediately recognized by the G+ system through intelligent interface integration
- Operating software can be operated in several languages
- e.g. English / German
GRD (Gomaco Remote Diagnostic System)
- Enables service personnel to access and check configuration parameters for fault diagnosis
- Remote setting of devices via GPS
- Transmission of GSI real-time data for optimum control of machine performance
- Notifications by e-mail on request
- Software updates
- Two-year license
Three mounted lifting legs
- with 914mm lifting cylinder
- 203mm manual adjustment
- 1,116mm total vertical adjustment
- with 180゜changeable drive
- Electronic rotation sensors for accurate track feedback
Hydraulic rear leg shift
- Power Slide for rear track positioning with intelligent cylinder to assist correct steering angle over the radius
- 1803mm side track movement for optimum machine balance.
Very stable front mold support left and right
frame
- right leg positioning:
- 422mm lateral hydraulic movement from outside to straight ahead
- 914mm lateral movement
- either left or right for kerb and gutter, barrier, slot drain, water channel, sidewalk
Hook & Go pull bar and additional bracket
- 457 mm pressure-compensated hydraulic height adjustment
and 660 mm manual height adjustment
- Total vertical adjustment 1117 mm
- 914 mm maximum hydraulic lateral adjustment
- With smart telescopic mold holder for repeatable mold changes
NOTE: A screed with a width of up to 2.5 m can be mounted on the right or left side of the standard 3300.
Mounted, foldable conveyor belt
- Hydraulically driven
- 5.64m between the central deflection rollers
- 610mm wide, vulcanized conveyor belt
- Variable speed regulation
- Lateral swivel bracket with hydraulic adjustment of the loading height
- hydraulic sideshift for the left or right side
- Hydraulic bracket for the standard auger conveyor
- vulcanized
- Conveyor belt protection
Emergency stop switch
Three crawler tracks - Series 1 with two-stage hydraulic motors
- Hydraulically driven with automatic tensioning
- Length 1.56m
- 300mm wide pads with road plates
- 100:1 reduction ratio
- Pave speed 0 to 15.1 mpm
- additional movement 0-40 mpm
Polyurethane trackpads
- 1 set
Hydraulic rotation drives
- with 180゜changing drive
- with electronic rotation sensors for accurate track feedback
High pressure water system
- Including 416 liter tank, adjustable high-pressure gun
- Pressure regulation from 0 to 140 bar
Lighting system for night operation
- Includes 4 LED lights, 9-32 V DC voltage, incl. attachment
The scope of delivery includes three paving molds:
1. Variable Farmway/ -road mold (year of manufacture: 2021)
Adjustment of track width and gap from outside to inside.
(Permanent total width of the mold: 3868mm; track width from 1000-1300mm;
intermediate track width of 800-1000mm)
- A transverse auger mounted on the hopper and driven by a chain
driven by a chain; drive unit without reduction gear.
- The concrete is fed into the hopper by means of the GT3300 conveyor belt.
- To achieve the different concrete strips with paving width, this requires
manual adjustment of the respective paving/track dimensions.
- Individual manual adjustment of the paving thickness of the tracks from at least
140 mm - 240 mm; stroke adjustment +80 / - 20 mm.
- Shape assembly and suspension in transport position included.
- Hydraulically operated - pressure-compensated side formwork
- 4 VIBRATORS included in the scope of delivery
(Straight design, almost unused/very little used)