VOGAMAKINA LIQUID SPRAY BOOTHS máquina de recubrimiento de polvo metálico nueva

LIQUID SPRAY BOOTH
The spray booth is designed for ventilation and filtering of paint overspray during manual painting application.

VENTILATION SYSTEM
Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and selected with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air.

FILTRATION SYSTEM
The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates the need for service when the filters are contaminated.

3.1. TECHNICAL SPECIFICATIONS
Spray booth type : Side draft, paint extraction spray booth

SPRAY BOOTH
Structure material : 1,2/1,5mm Galvanized sheet metal
Filter type : 1st stage – Overspray cardboard filter
2nd stage – Fiberglass paint-stop filter
Extraction fan : 380V 50Hz
Belt-pulley axial type, sheet metal body, polyamide propeller
80-85 dBa noise level
Illumination : ATEX Zone-II
Active carbon filtration : Optional

CONTROL PANEL AND ELECTRICAL INSTALLATION
The electrical control panel is mounted on the cabin and the internal cabling has been made. The control panel consists of panel elements from SCHNEIDER ELECTRIC brand.
Since the control panel is located outside the ATEX zone, it is not Ex-proof.