Karl Schnell UHT line línea de producción de queso




























































































Si decide comprar maquinaria a un precio inferior, póngase en contacto con el verdadero vendedor. Recopile toda la información que le sea posible sobre el propietario de la maquinaria. Una forma de engaño es presentarse como empresa. En caso de sospecha, infórmenos mediante el formulario de comentarios y sugerencias para que lo comprobemos.
Antes de confirmar una compra, revise detenidamente varias ofertas de venta para ver cuál es el precio medio del equipo elegido. Si el precio de la oferta que le interesa es mucho menor que el de ofertas similares, piénselo dos veces. Una diferencia de precio significativa puede conllevar a defectos ocultos o a un intento de fraude por parte del vendedor.
No compre productos cuyo precio diste mucho del precio medio de equipos similares.
No acepte compromisos dudosos o mercancías con prepago. Si no lo tiene claro, no dude en solicitar aclaraciones, pida fotos adicionales y documentos del equipo, compruebe la autenticidad de los mismos y pregunte todo lo necesario.
Esta es la forma más habitual de fraude. Ciertos vendedores pueden requerir una cantidad del pago por adelantado en concepto de «reserva» de su compra. Así, los estafadores perciben grandes cantidades de dinero y después desaparecen sin dejar huella.
- Transferencia de prepago a la tarjeta
- No realice un pago por adelantado sin documentación que confirme el proceso de transferencia de dinero, si durante la comunicación con el vendedor ha surgido alguna duda.
- Transferencia a una cuenta «fiduciaria»
- Dicha solicitud debe alarmarle, ya que en la mayoría de los casos se trata de fraudes.
- Transferencia a una cuenta de una empresa con un nombre similar
- Tenga cuidado, ya que los estafadores pueden ocultarse tras la identidad de empresas reconocidas, realizando modificaciones mínimas en su nombre. No transfiera dinero si tiene dudas sobre el nombre de la empresa.
- Sustitución de sus propios datos en la factura de una empresa real
- Antes de realizar una transferencia, asegúrese de que los datos especificados sean correctos y que aludan a la empresa en cuestión.
Contactos del vendedor










Capacity output: 200 up to 750 kg per hour
Operating temperature: 142 °C
Bleding line: Included
Inline preheating system: Included
UHT System: Included
Creaming tank: Included
Main power: 400 V - 50 Hz - 97 kW
Floor surface: ± 10 x 10 meters
Nettogewicht: ± 12.000 kg
Complete Karl Schnell GmbH & Co. KG
Germany processing line for the production of processed UHT cheese from natural cheese blocks. The complete processing line is designed for the continuous and efficient processing of natural cheese into a processed cheese product suitable for UHT processing and aseptic filling (ideal for IWS / Triangle and foil wrapped cheese packaging). The line combines the necessary processing equipment for cheese preparation
melting and resting to achieve a consistent final product quality. The line offers a flexible production capacity and is suitable for industrial-scale production of processed cheese products. Capacity of end product of the line: 200 - 750 kg/h output. Year of manufacturing of the complete line: 2011. Project number: AK09-2971. Processing line number: 09-164.The complete line exist out of the following machines:A) Processed Cheese Blending Line1. Trolley Elevator
Karl Schnell
type 6012. Ribbon Blender / Mixer
1.500 ltr
Karl Schnell
type 7403. Feeding bin with double screws
2.000 ltr
Karl Schnell
type 675B) UHT Line4. Inline preheating system ± 15 -> 75 / 80 °C
Karl Schnell
type 2615. Storage Tank
300 liter
± 75 / 80 °C
Karl Schnell
type 2536. UHT System
200 – 750 liter per hour
± 75 / 80 – 142 - ± 75 / 80 °C
Karl Schnell
type 2607. Creaming Tank
± 75 / 80 °C
Karl Schnell
type 254C) Controls8. Main control panel for the complete line (Blending and UHT).Line in details:1. Trolley Elevator / Hebevorrichtung (131)Lifting device for standard stainless steel mobile trolleys (200 litres) into the Ribbon Blender / Mixer. Suitable for handling dry ingredients. (Cheese blocks
butter
powders etc.)Manufacturer: Karl SchnellType: 601Year: 2011Serial number: 11902Speed: 7 meter/minLifting height: 2.750 mmLifting power: 2500 N = 250 kgPower: 400 V – 50 Hz – 2,8 A – 1,1 kWWeight: ± 400 kg- 4x 200 liter stawinless steel mobile trolleys.- Some tools for daily operation.2. Ribbon Blender / Mixer
1.500 liter (140)The blending section is designed for the homogeneous mixing of processed cheese ingredients. The blenders ensure thorough and consistent blending of the productManufacturer: Karl SchnellType: 740Year: 2002 but date of delivery: 2011Serial number: 13482Volume for filling: 1.675 literTotal volume: 2.700 literBlending shaft speed: 30 / 60 rpmPower: 400 V – 50 Hz – 60 A – 28 kWWeight: ± 2.500 kg- Mounted on stainless steel frame with load cells for weight indication.- Double Ribbon Shaft Blender.- Heavy execution.- CIP cleanable by spray bowls.- Control panel with recipe control.- Additional water heating unit
Karl Schnell
type 261.- Stairs / frame to reach the top of the mixer.3. Feeding bin with double screws (150)Buffer tank provide process continuity and control product flow to downstream processing. Integrated pumps enable reliable product transfer between the buffer tank and subsequent processing stages.Manufacturer: Karl SchnellType: 675Year: 2011Serial number: 14376Volume for filling: 2.118 literTotal volume: 2.418 literBlending shaft speed: 9,9 rpmOutlet height: 425 mmPower: 400 V – 50 Hz – 40 A – 20 kWWeight: ± 2.500 kg- Mounted on stainless steel frame with load cells for weight indication.- Double Screws.- 2x Stainless steel lids.- CIP cleanable by spray bowls.- Product outfeed lobe pump
Fristam FKL50
serial number FKL 501004942
current speed 95 rpm
max speed 600 rpm
max pressure 500 PSI
motor 5,5 kW.- CIP pump
Fristam FPE 3532/175
serial number C438540030
30 m3/h at 3 bar
2.900 rpm
H 46 m
motor 7,5 kW.4. Inline preheating system (400)The inline preheating system is used to continuously heat and process the cheese mixture from approximately 15 °C to 80 °C. During this step
the product is thermally treated and homogenized to achieve the desired structure and consistency. This ensures efficient processing
uniform product quality
and a stable flow for downstream operations.Manufacturer: Karl SchnellType: 261Year: 2011Serial number: 14377Capacity: 200 – 1.000 kg/hMax steam pressure/temperature: 8 bar
170 °CPower: 400 V – 50 Hz – 3,5 A – 1,6 kWWeight: ± 800 kg- Skid mounted.- Inline dynamic mixer
motor 1,5 kW
1.450 rpm.- Steam valve
model 3277
pressure control 0,3 – 1,1 bar with actuating valve and actuating controller.- Steam injector
diameter of bore 2,0 mm.5. Storage Tank (420)The buffer tank is used for temporary storage of processed cheese at elevated temperature prior to downstream processing or filling. The product is maintained at approximately 75 / 80 °C to preserve flowability and ensure hygienic conditions. This supports a continuous process flow
prevents temperature loss and ensures consistent product quality during transfer to the next stage.Manufacturer: Karl SchnellType: 253 (300 ltr Vorratssilo)Year: 2011Serial number: 14378Volume for filling: 300 literTotal volume: 440 literOutlet height: 485 mmPower: 400 V – 50 Hz – 35 A – 12 kWWeight: ± 1.000 kg- Conical
isolated tank.- Scraper agitator in the tank
motor 1,5 kW
speed 1.430 rpm reduced to 16 rpm.- Manhole.- Sightglass with light.- CIP cleanable by spray bowls.- Level control.- Control panel with Siemens Simatic ET 200M.- Product pump
screw pump
Wangen ESP
serial number 926020a
200 – 1.000 ltr/h at 2 - 8 bar
motor 2,2 kW
speed 1.425 reduced to 65 rpm.- CIP Pump
centrifugal pump
Fristam FPE 3532/175
30 m3/h at 4,6 bar
motor 7,5 kW
2.900 rpm.6. UHT System (430)The UHT system is used to heat the processed cheese from approximately 75 / 80 °C to a sterilization temperature of around 142 °C
followed by controlled cooling back to 75 / 80 °C. This high-temperature short-time treatment ensures microbiological stability and extends shelf life while preserving product quality. It enables aseptic or prolonged storage conditions and supports consistent
safe downstream processing and filling.Manufacturer: Karl SchnellType: 260 (UHT Konit Anlage 200-750 ltr/h)Year: 2011Serial number: 14379Capacity: 200 – 750 ltr/hPower: 400 V – 50 Hz – 38 A – 19 kWWeight: ± 2.000 kg- Skid mounted.- Steam valve 01
model 3277
pressure control 0,3 – 1,1 bar with actuating valve 6,3 Kvs and actuating controller.- Steam valve 02
model 3277
pressure control 0,3 – 1,1 bar with actuating valve 6,3 Kvs and actuating controller.- Vacuum control valve
model 3277
pressure control 0,3 – 1,1 bar with actuating valve 6,3 Kvs and actuating controller.- Hygienic corner valve 01
Arca
391-P1-L
Kvs 18 with actuating controller.- Hygienic corner valve 02
Arca
391-P1-L
Kvs 18 with actuating controller.- 2x Direct steam injectors
diameter of bore +/- 2,0 mm.- Twin screw product pump
Bornemann
SLH
0,3 – 1,5 m3/h.- CIP pump
centrifugal pump
Fristam FPE 3532/175
30 m3/h at 3 bar
motor 7,5 kW
2.900 rpm.- Vacuum pump
Dophin
LH0060 A GG 0
2,2 kW.- Holding cell tubes.- Flow plates to make the correct flow connections.- Flow diversion system if product didn’t reach its temperature.- Flash cooling tank
vacuum
CIP cleanable
sight glass
lid to open.- 2x Acid and lye bins with lid on top for CIP.- 2 Filters on the outlet (435).- Control panel with Siemens Siematic ET 200M and Siemens MP 377 12 ‘’ touch screen panel
for controlling and monitoring the inline preheating system (400)
storage tank (420)
UHT (430) and creaming tank (440).7. Creaming Tank (440)The creaming tank (holding tank) is used to hold and condition the processed cheese at approximately 75 / 80 °C to allow the product to fully develop its final texture and consistency. During this stage
the cheese mass stabilizes and achieves a homogeneous structure.Manufacturer: Karl SchnellType: 254 (330 ltr Cremierbehälter)Year: 2011Serial number: 14380Volume for filling: 330 literTotal volume: 450 literOutlet height: 324 mmPower: 400 V – 50 Hz – 29 A – 15 kWWeight: ± 1.500 kg- Isolated tank.- Scraper agitator and blade agitator in the tank
both driven by 1 motor of 2,2 kW
speed 1.425 rpm reduced to 19 rpm.- Manhole.- Sightglass with light.- CIP cleanable by spray bowls.- Weighing system with load cells.- Viscometry
type CV
serial number: FK 0804/010 QS- Control panel with Siemens Simatic ET 200M and Brabender Messtechnik panel.- Product lobe pump
Fristam
FKL 25A
serial number FKL 25A1108278
300 – 1.500 ltr/h
max speed 600 rpm
max pressure 300 PSI.- CIP Pump
centrifugal pump
Fristam FPE 3532/175
30 m3/h at 4,6 bar
motor 7,5 kW
2.900 rpm.8. Main control panel for the complete line
blending and processing (600).Main control panel with all motorgroups
main PLC
frequency converters and main switch.- Complete stainless steel.- 8 doors.- Main power supply.- Siemens Simatic S7-300 PLC.- Endress & Hauser temperature recorder.- Electrical scheme available.- Program digitial available.9. Interconnecting product piping and valves.Most of the interconnecting product piping and valves are already dismantled but will be delivered with the line.10. Manuals / SoftwareDigital file with manuals available
electric
spare parts
technical drawings
PLC program etc