Homag PROFI BAZ20/30/16/V/D centro de mecanizado para madera

This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information.
Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor
Workpiece capacity:Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm millingFrieze width min. 120 mm; Weight max. 150 kg
Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling
Frieze width min. 120 mm; Weight max. 150 kg
Table/Clamping:Continuous table (D-table)Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment8 vacuum clamps 125 x 50 x 100 mmWorking height lower edge of workpiece 950 mmUnit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console)
Continuous table (D-table)
Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment
8 vacuum clamps 125 x 50 x 100 mm
Working height lower edge of workpiece 950 mm
Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console)
Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console
Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement)
Main spindle:Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpmTool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units
Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm
Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units
Aggregate interface/C-axis:Pneumatic and swivel drive interfaceC-axis with torque drive and 3-point support
Pneumatic and swivel drive interface
C-axis with torque drive and 3-point support
Tool changer:18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mmConfigurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mmChanger raisable for traveling pickup (left side)
18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm
Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm
Changer raisable for traveling pickup (left side)
Units/aggregates (for tool changer unless noted):Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axisLock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axisSwiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivelMilling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mmFlush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoesWPL knife head: run-out angle 5°, Ø 70 mm
Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis
Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis
Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel
Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm
Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes
WPL knife head: run-out angle 5°, Ø 70 mm
Gluing/edgebanding equipment:Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axisGluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivationEdge hold-down device, manual adjustment
Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis
Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation
Edge hold-down device, manual adjustment
Magazine/pickup:Pickup space on X-support for interchangeable special unit (e.g., motor-driven swiveling machining spindle)
Pickup space on X-support for interchangeable special unit (e.g., motor-driven swiveling machining spindle)
Connectivity: Ethernet network connection
Additional equipment
Chip conveyor belt: Integrated chip/scrap disposal via chip belt below longitudinal crossbars
Vacuum pump: 100/140 m³/h
External pre-chopping station with 3-stage roller, automatic:Roller turntable on operator side; roller Ø 800 mmEdge length min. 350 mm; edge height max. 90 mmResidual edge length monitoring with feed stop at 2400 mm
Roller turntable on operator side; roller Ø 800 mm
Edge length min. 350 mm; edge height max. 90 mm
Residual edge length monitoring with feed stop at 2400 mm
application type: CNC Wood Machining
Location: Germany
machine type: CNC Wood Machining Centre
Available from: 01/09/2026
Number of Axes: 4